EMS3 SPLASH PROOF Unit Kit

This is the EMS3 Splash Proof unit, mounting bracket and a 3m (10Ft) wiring harness.

Regular units are for internal use only, when mounted in moist environments they allow water to seep into the buttons causing failures, this new splashproof enclosure keeps the buttons and screen clean and dry.

The faceplate and keypad on this unit are one piece making the face of this unit splash proof.

Additional moisture protection can be achieved by sealing the two housings together with a non-gluing sealant like Wurth DP300 or similar.

Should you require a Splash Proof unit with a full sensor kit, please contact us.

Requires additional sensors and adapters purchased separately or as a kit

• High resolution, high brightness colour screen

• 52mm round automotive housing

• Dedicated EGT / Thermocouple input with timelapse display

• Dedicated Coolant Level Detector input

• Dedicated RPM input

• External buzzer output

• Customizable auto dimming sensor for bright or dark environments

• 4 separately customisable analogue inputs can be used as:

  • Pressure Inputs such as Oil, Boost, Fuel, Air etc

  • Temperature Inputs such as Coolant, Oil, Air etc

  • Can also be used as On-Off- inputs

  • User editable input names

• Voltage of supply  battery

• Engine running hours / Service Timer with voltage trigger

• Each function has customizable high and low 'Caution' and 'Alarm' set points

• Each function has preset sensors or can be calibrated to suit almost any sensor

• 2 Outputs, individually selectable from any function can be enabled to switch relay outputs

• CAN Bus output for Datalogger integration (Purchased separately)

• Flash upgradable software